HOME >>3D Camber / toe-in
3D Camber / toe-in
Service station “AutoFriends” has an advantage over other stations by the presence of the newest and high-precision 3D wheel alignment stand from the German manufacturer HOFMANN.
This allows our specialists to adjust the wheel alignment angles (wheel alignment) with the highest precision result … At the stand 3D camber-convergence diagnostics of all modern cars and various types from passenger cars to low-tonnage commercial vehicles is carried out.
Regular and accurate adjustment of wheel alignment at the 3D wheel alignment stand will provide you with a comfortable and safe ride on our difficult and bumpy roads, as well as save money on the need to buy new tires.
Camber / toe-in
And so what most often brings a motorist to a car service:
- uneven (zero position) steering wheel on the road
- uneven wear on the tires of the car
- the car drifting off the lane
- yaw of the car on the road
It is also necessary to check the camber / toe after replacing the steering rods and steering tips, shock absorbers, springs, pneumatic cushion, levers, subframe.
It is extremely important to check the wheel alignment angles after performing complex straightening work, replacing side members, cup of the body, a quarter of the body or other power part of the car. And finally, after a trouble that can happen to everyone, it is also required to check the camber / convergence after a strong impact on the curb, or after falling into a pit, since the convergence of the car may change after which the driver may not feel the difference and the rubber wear will not occur evenly.
Fault diagnosis and repair of camber / convergence
In those. center “AutoFriends” will carry out professional diagnostics of the suspension and 3D camber-toe of your car.
The equipment at AutoFriend service center allows you to carry out the alignment of all modern cars and various types from passenger cars to light commercial vehicles (buses to 5.5t). For a durable and safe use of car tires and a feeling of confidence on the road, regular check of the camber / toe-in of the car is required, at least once every six months, the recommended check of the camber / toe-in after changing seasonal tires.
Carrying out work on a modern 3D wheel alignment stand and using many years of experience Auto Friends service station can guarantee an excellent result in a minimum of time.
Service station “AutoFriends” has an advantage over other stations by the presence of the newest and high-precision 3D wheel alignment stand from the German manufacturer HOFMANN. This allows our specialists to adjust the wheel alignment angles (wheel alignment) with the highest precision. At the stand 3D camber-convergence diagnostics of all modern cars and various types from passenger cars to low-tonnage commercial vehicles is carried out.
Regular and accurate adjustment of wheel alignment at the 3D wheel alignment stand will provide you with a comfortable and safe ride on our difficult and bumpy roads, as well as save money on the need to buy new tires.
Typical reasons for performing car camber / convergence
And so what most often brings a motorist to a car service:
- car drifting off the lane
- yawing of the car on the road
- uneven (zero position) steering wheel on the road
- uneven wear of the car tires
It is also necessary to check the camber / convergence after replacing the steering rods and steering tips, shock absorbers, springs, pneumatic cushion, levers, subframe.
It is extremely important to check the wheel alignment angles after performing complex straightening work, replacing side members, cup of the body, a quarter of the body or other power part of the car. And finally, after a trouble that can happen to everyone, it is also required to check the camber / convergence after a strong impact on the curb, or after falling into a pit, since the convergence of the car may change after which the driver may not feel the difference and the rubber wear will not occur evenly.
Camber / toe-in
In those. center “AutoFriends” will carry out professional diagnostics of the suspension and 3D camber-toe of your car.
The equipment at AutoFriends service center allows you to carry out the alignment of all modern cars and various types from passenger cars to light commercial vehicles (buses to 5.5t). For a durable and safe use of car tires and a feeling of confidence on the road, regular check of the camber / toe-in of the car is required, at least once every six months, the recommended check of the camber / toe-in after changing seasonal tires.
Carrying out work on a modern 3D wheel alignment stand and using many years of experience AutoFriends service station can guarantee an excellent result in a minimum of time.
Absolute precision without repeat visits.